3237522 - 1040B36 rear fuel delivery line - r r

Removing ( Refitting ) Position the vehicle on the ramp. Proceed with removal  - 7050A20  one-piece rear seat cushion - r r . Proceed with removal  - 7050B10  l/h or r/h head restraint (one) of rear seat - r+r . Proceed with removal  - 7050A19  rear seat squab - r r . Proceed with removal  - 7050A10  rear seat - r+r . Working from the luggage compartment, move the load compartment lining. 1. Remove the plastic buttons (1a) and remove the frame (1b). 1. Undo the nuts (1a) and remove the reinforcement bracket (1b).2. Undo the remaining nuts (2a) and remove the access cover (2b) to the submerged pump assembly complete with level gauge. 1. Disconnect the rapid attachment for the rear fuel supply pipe from the immersed pump assembly complete with gauge. 1. Working from under the car, disconnect the rapid attachment for the rear fuel supply pipe, front fuel supply pipe side and remove. Refitting ( Removing ) Refit the rear fuel delivery pipe in its seat and connect to the intermediate fuel delivery pipe using the quick-release connector.Connect the rapid attachment for the rear fuel supply pipe to the immersed pump assembly complete with gauge.Fit the access cover to the submerged pump assembly complete with gauge and secure it using the rear bolts.Place the reinforcement brackets back in their housings and secure them using the nuts.Place the frame back in its housing and secure it using the plastic studs.Refit the load compartment lining. Proceed with refitting  - 7050A10  rear seat - r+r . Proceed with refitting  - 7050A19  rear seat squab - r r . Proceed with refitting  - 7050B10  l/h or r/h head restraint (one) of rear seat - r+r . Proceed with refitting  - 7050A20  one-piece rear seat cushion - r r .