3237848 - 1084B40 engine oil delivery pipe to turbocharger - r + r

Removing ( Refitting ) Position the vehicle on the ramp Proceed with removal  - 1016A10  sound-proofing cover - r + r Proceed with removal  - 7055B54  under-engine guard - r r1. Undo the bolts (1a) and remove the exhaust manifold heat shield (1b). 1. Undo the connector (1a) and disconnect engine oil supply pipe to the turbocharger (1b), crankcase side. Proceed with removal  - 1088D24  rigid pipe for coolant inlet to water pump - r + r1. Undo the nuts (1a) and remove the upper exhaust manifold heat shield (1b). 1. Undo the connector (1a) and disconnect the engine oil supply pipe to the turbocharger (1b), turbocharger side and remove it. Refitting ( Removing ) 1. Place the engine oil supply pipe to the turbocharger (1a) back in its housing, connect it to the turbocharger and secure it by tightening the connector (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Connector	OIL DELIVERY PIPE TO TURBO	M12	(Engine crankcase side) 1.4 ÷ 1.7

Place the upper exhaust manifold heat shield back in its housing and fix it using the nuts. Proceed with refitting  - 1088D24  rigid pipe for coolant inlet to water pump - r + r1. Connect the engine oil delivery pipe to the turbocharger (1a), crankcase side, and tighten the connector (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	-	-	-	-

Place the lower exhaust manifold heat shield back in its housing and fix it using the bolts. Refill the engine cooling system with coolant  - 0010T20  coolant change . Proceed with refitting  - 7055B54  under-engine guard - r r Proceed with refitting  - 1016A10  sound-proofing cover - r + rRemove the car from the ramps.