3237905 - 1820B54 hose from damper - r r
Removing
(
Refitting
)
Proceed with removal
- 1016A10 sound-proofing cover
- r + r
Proceed with removal
- 5530B10 battery - r+r
Proceed with removal
- 5530B52 Battery DRIP TRAY/SUPPORT
- R.R.Remove the protective cap on the master
cylinder bleed valve. Connect the collection system (pipe and
reservoir) to the bleed valve on the clutch operating cylinder.Operate the clutch pedal until the brake-clutch
fluid reservoir is empty. 1. Undo the connectors (1a) and remove the pipe from the vibration
damper to the operating cylinder (1b), after releasing it from the
band (1c).
Refitting
(
Removing
)
1. Place the pipe from the vibration damper to the operating cylinder
(1a) back in its seating, secure it with the band (1b) and tighten
the connectors (1c) to the specified torque.  | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 1c | Connector | HOSE FROM VIBRATION DAMPER | M12 | (Operating cylinder side) 1.4 ÷ 2.2 |
| Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 1c | Connector | RIGID INLET PIPE TO VIBRATION DAMPER | M12 | (Vibration damper side) 1.4 ÷ 2.2 |
