1820B51 VIBRATION DAMPER RIGID INLET PIPE - R.R. - Alfa - 156 - eLearn

3237918 - 1820B51 Vibration damper RIGID inlet PIPE - R.R.

) Proceed with removal - 5530B10 battery - r+r . Proceed with removal - 5530B52 Battery DRIP TRAY/SUPPORT - R.R. . Remove the protective cap on the master cylinder bleed valve.Connect the collection system (pipe and reservoir) to the bleed valve on the clutch operating cylinder.Operate the clutch pedal until the brake/clutch reservoir is completely empty.1. Undo the connectors (1a) and remove the vibration damper rigid inlet pipe (1b) after releasing it from the attachment (1c).

Refitting ( Removing

) 1. Place the vibration damper rigid inlet pipe (1a) in its seating, secure it with the band (1b) and tighten the connectors (1c) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1c	Connector	RIGID INLET PIPE TO VIBRATION DAMPER	M12	Intermediate connector side 1.4 ÷ 2.2

	Fastening	Component	Ø	Value(daNm)
1c	Connector	RIGID INLET PIPE TO VIBRATION DAMPER	M12	(Vibration damper side) 1.4 ÷ 2.2

Bleed the air and top up the level in the hydraulic clutch system - 0010T67 hydraulic clutch system bleed air . Bleed the air from the hydraulic braking system - 0010T65 hydraulic brake system bleed air . Proceed with refitting - 5530B52 Battery DRIP TRAY/SUPPORT - R.R. . Proceed with refitting - 5530B10 battery - r+r .