3237919 - 1820B58 clutch hydraulic circuit vibration damper - r+r
Removing
(
Refitting
)
Proceed with removal
- 1016A10 sound-proofing cover
- r + r
Proceed with removal
- 5530B10 battery - r+r
Proceed with removal
- 5530B52 Battery DRIP TRAY/SUPPORT
- R.R.Remove the protective cap on the master
cylinder bleed valve. Connect the collection system (pipe and
reservoir) to the bleed valve on the clutch operating cylinder.Operate the clutch pedal until the brake/clutch
reservoir is completely empty.1. Undo the connector and disconnect the vibration damper rigid
inlet pipe, damper side.2. Undo the connector and disconnect the flexible pipe from the
vibration damper to the operating cylinder, damper side.3. Undo the bolts (3a) and remove the hydraulic clutch system vibration
damper (3b).
Refitting
(
Removing
)
1. Place the clutch hydraulic circuit vibration damper (1a) back
in its housing and secure it with the bolts (1b).2. Connect the pipe from the vibration damper to the operating cylinder,
damper side and tighten the connector to the recommended torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 2 | Connector | HOSE FROM VIBRATION DAMPER | M12 | (Vibration damper side) 1.4 ÷ 2.2 |
| Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 3 | Connector | RIGID INLET PIPE TO VIBRATION DAMPER | M12 | (Vibration damper side) 1.4 ÷ 2.2 |
