1040A74 INERTIA SWITCH FOR ELECTRIC PUMP SUPPLY CIRCUIT R + R - Alfa - 156 - eLearn

3237519 - 1040A74 inertia switch for electric pump supply circuit r + r

) Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

1. Undo the bolts (1a) and remove protector (1b) from the inertia switch under the driver's seat.2. Undo the inertia switch bolts for the electric pump feed circuit cut-out.3. Remove the inertia switch for electric pump feed cut-out (3a) after disconnecting electrical connection (3b).

	Name	Connector
3b	Inertia switch	I50

Refitting ( Removing

) Conect the electrical connection to the inertia switch for electric pump feed circuit cut-out, then place it back in it housing and fix it using the bolts.Place the inertia switch back in its housing and fix it using the bolts.Connect the negative (-) battery terminal.