1048A14 AIR CLEANER FILTERING ELEMENT - REPLACE. - Alfa - 156 - eLearn

3237526 - 1048A14 air cleaner filtering element - replace.

) Proceed with removal - 1016A10 sound-proofing cover - r + r . Ensure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with removal - 1048A50 air inlet pipe to turbo charger - r + r . 1. Disconnect the electrical connection from the air flow meter.

	Name	Connector
1	Air flow meter	K41

2. Undo the bolts (2a) and remove the air filter cover (2b) complete with air flow meter (2c) and sleeve (2d).3. Remove the duct.4. Remove the air filter filter element.

Refitting ( Removing

) .

Before fitting a new filter element, remove any impurities in the filter casing (by suction) that could fall into the clean air section of the circuit. Take care to position the filter element correctly so that the seal is in its housing and is not cut or damaged.

Place the air filter filter element back in its housing.Refit the duct.Place the air filter cover, complete with air flow meter and corrugated sleeve and secure it using the bolts.Connect the electrical connection to the air flow meter. Proceed with refitting - 1048A50 air inlet pipe to turbo charger - r + r . Connect the negative (-) battery terminal. Proceed with refitting - 1016A10 sound-proofing cover - r + r .