3237574 - 1076B58 exhaust pipe attachment to engine seal/s - replace

Removing ( Refitting ) Position the vehicle on the ramp. Proceed with removal  - 7055B54  under-engine guard - r r . 1. Undo the nuts (1a) and disconnect the front section of the exhaust pipe (1b) from the catalytic preconverter.2. Remove the gasket. Refitting ( Removing ) 1. Place a new gasket in the housing.2. Connect the front section of the exhaust pipe (2a) to the catalytic preconverter and tighten the nuts (2b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2b	Nut	PRE-CAT CONVERTOR/CAT CONVERTOR PIPE	M8	(Catalyitic preconverter side) 2.3 ÷ 2.8

Proceed with refitting  - 7055B54  under-engine guard - r r . Remove the car from the ramps.