3237725 - 1044B10 fuel filter assembly - r + r or replace

Removing ( Refitting ) Position the vehicle on the ramp. Proceed with removal  - 1016A10  sound-proofing cover - r + r . Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with removal  - 7055B54  under-engine guard - r r . 1. Disconnect the quick-release connector for the front fuel supply pipe, fuel filter side.2. Disconnect the rapid attachment on the fuel return pipe to the fuel return manifold pipe, fuel filter side.3. Disconnect the quick-release connector for the fuel supply pipe to the pressure pump, fuel filter side.

Recover the fuel which comes out in a suitable container.

4. Disconnect the electrical connection from the fuel temperature sensor.

	Name	Connector
4	Fuel temperature sensor	K81

5. Disconnect the electrical connection from the fuel pre-heating device.

	Name	Connector
5	Fuel temperature sensor	K81

1. Undo the nuts (1a), raise the fuel filter sufficiently to disconnect the electrical connection from the water presence sensor in the fuel filter (1b).

	Name	Connector
1b	Water in diesel filter sensor	K31

2. Remove the fuel filter. Refitting ( Removing ) Connect the electrical connection to the water-in-fuel filter sensor, then refit the complete fuel filter in its seating and secure with its nuts.Connect the electrical connection to the fuel pre-heating device.Connect the electrical connection to the fuel temperature sensor.Connect the quick-release connector for the fuel supply pipe to the pressure pump, fuel filter side.Connect the rapid attachment of the front fuel return pipe to the fuel return manifold pipe, fuel filter side.Connect the quick-release connector for the front fuel supply pipe, fuel filter side. Proceed with refitting  - 7055B54  under-engine guard - r r . Connect the negative (-) battery terminal. Proceed with refitting  - 1016A10  sound-proofing cover - r + r . Remove the car from the ramps.