1064A42 SOLENOID CONTROLLING TURBOCHARGER VANE POSITION ACTUATOR R R - Alfa - 156 - eLearn

3237865 - 1064A42 solenoid controlling turbocharger vane position actuator r r

) Position the vehicle on the ramp Proceed with removal - 1016A10 sound-proofing cover - r + rEnsure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

1. Disconnect the vacuum pipes from the solenoid valve for the turbocharger vanes actuator.2. Disconnect the electrical connection from the turbocharger vane actuator solenoid.

	Name	Connector
2	Variable geometry turbine solenoid valve	L36

3. Undo the nuts (3a) and remove the turbocharger vane position actuator solenoid valve (3b).

Refitting ( Removing

) Fit the turbocharger vane actuator solenoid back in its housing and fix it using the nuts.Connect the electrical connection to the turbocharger vane actuator solenoid. Connect the vacuum pipes to the solenoid valve for the turbocharger vanes actuator.Connect the negative (-) battery terminal Proceed with refitting - 1016A10 sound-proofing cover - r + rRemove the car from the ramps.