1084A40 ENGINE OIL LEVEL SENSOR - R + R - Alfa - 156 - eLearn

3237868 - 1084A40 engine oil level sensor - r + r

) Position the vehicle on the rampEnsure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with removal - 7055B54 under-engine guard - r r1. Disconnect the electrical connection for the engine oil level sensor.

	Name	Connector
1	Engine oil level sensor	K32

2. Undo and remove the engine oil level sensor.

Refitting ( Removing

) Place the engine oil level sensor back in its housing and tighten it to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	-	OIL LEVEL DIPSTICK SENSOR	M12	(Crankcase sump side) 2.0 ÷ 3.0

Connect the electrical connection for the engine oil level sensor. Proceed with refitting - 7055B54 under-engine guard - r rConnect the negative (-) battery terminalRemove the car from the ramps.