3238136 - 4130B32 power steering pump mount - r r

 Refer to op.. 1008C19  engine link mount - r r . Position the vehicle on the rampEnsure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with removal  - 1016A10  sound-proofing cover - r + r . Proceed with removal  - 1008C10  power unit upper reaction link r r . Proceed with removal  - 1060G80  ds electric injection control unit - r r . Proceed with removal  - 4450B04  right front wheel r r . Proceed with removal  - 7055B54  under-engine guard - r r . Proceed with removal - 7055B91 Right front WHEEL ARCH LINER - R.R. . Proceed with removal  - 1092G10  single engine belt r r . Proceed with removal  - 1092A10  Crankshaft services PULLEY - R.R. . Proceed with removal  - 1092G20  engine component single belt fixed tensioner - one - r + r . Proceed with removal  - 1032D12  timing system protective cover(s) - r + r . Proceed with removal  - 1032B10  toothed timing belt - r + r for timing adjustment or replacement . Proceed with removal  - 1032C10  MOVING timing TENSIONER - R.R. with timing belt/chain removed . Proceed with removal  - 1032C30  fixed timing system tensioner - r + r with timing belt removed . Proceed with removal  - 1084A16  oil dip stick pipe - r r . 1. Undo the bolt (1a) and remove the single drive belt tensioner (1b).2. Undo the bolts (2a) and remove the power assisted steering pump drive pulley (2b).3. Undo the bolts (3a) and move the power assisted steering pump (3b) backwards in relation to the support. 4. Undo the bolts fixing the alternator and move it back. 1. Undo the bolts (1a) and remove the power assisted steering pump support (1b). 1. Place the power assisted steering pump mounting (1a) back in its housing and fix it tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	POWER STEERING PUMP SUPPORT/BRACKET	M8	(Engine crankcase side) 2.3 ÷ 2.8

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	POWER STEERING PUMP SUPPORT/BRACKET	M10	(Crankcase side) 4.5 ÷ 5.5

1. Place the alternator back in its housing and tighten the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1	Bolt	ALTERNATOR ASSEMBLY	M10	4.5 ÷ 5.5

	Fastening	Component	Ø	Value(daNm)
1	Bolt	ALTERNATOR ASSEMBLY	M12	6.3 ÷ 7.7

2. Place the power assisted steering pump (2a) back in its housing and secure it by tightening the bolts (2b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2b	Bolt	POWER STEERING PUMP	M8	(Support side) 2.3 ÷ 2.8

3. Place the power assisted steering pump drive pulley (3a) back in its housing and secure it tightening the bolts (3b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
3b	Bolt	POWER STEERING PUMP DRIVE PULLEY	M8	(Power assisted steering pump side 23 28

4. Place the engine components single drive belt moving tensioner (4a) back in its housing and fix it tightening the bolt (4b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
4b	Bolt	SINGLE SERVICES MOBILE BELT TENSIONER	M8	2.3 ÷ 2.8

Proceed with refitting  - 1084A16  oil dip stick pipe - r r . Proceed with refitting  - 1032C30  fixed timing system tensioner - r + r with timing belt removed . Proceed with refitting  - 1032C10  MOVING timing TENSIONER - R.R. with timing belt/chain removed . Proceed with refitting  - 1032B10  toothed timing belt - r + r for timing adjustment or replacement . Proceed with refitting  - 1032D12  timing system protective cover(s) - r + r . Proceed with refitting  - 1092G20  engine component single belt fixed tensioner - one - r + r . Proceed with refitting  - 1092A10  Crankshaft services PULLEY - R.R. . Proceed with refitting  - 1092G10  single engine belt r r . Proceed with refitting - 7055B91 Right front WHEEL ARCH LINER - R.R. . Proceed with refitting  - 7055B54  under-engine guard - r r . Proceed with refitting  - 4450B04  right front wheel r r . Proceed with refitting  - 1060G80  ds electric injection control unit - r r . Proceed with refitting  - 1008C10  power unit upper reaction link r r . Proceed with refitting  - 1016A10  sound-proofing cover - r + rConnect the negative (-) battery terminalRemove the car from the ramps.