3238720 - 7025A10 bonnet lid - square

 Refer to op.. 7025A12  Engine front sound insulation COVER - R.R. Refer to op.. 7025A14  Bonnet LID - R.R. Lift the bonnet lid.1. Loosen the hinge bolts and adjust the position of the bonnet lid.The arrows indicate possible movements.2. Tighten the bolts (2a, 2b) to the recommended torque.

FasteningComponentØValue(daNm)
2aUpper boltBONNET LID-1.5

FasteningComponentØValue(daNm)
2bLower boltBONNET LID-0.9
1. Adjust buffer blocks if necessary.2. If necessary adjust the catch position (  See Op. 7025A34  bonnet lid lock (one) - r+r or repair ). If the adjustments described above are insufficient, adjust the position of the bonnet lid hinges as described below. Carry out op.   7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R.3. Slacken the nuts (3a) securing the hinges (3b) and adjust the position until the bonnet is aligned.Arrows (3c) indicate possible movements.4. Tighten the nuts (4a, 4b) to the recommended torque.

FasteningComponentØValue(daNm)
4aLower nutBONNET LID HINGES-2.2 - 2.6

FasteningComponentØValue(daNm)
4bUpper nutBONNET LID HINGES-0.7 - 0.8
Complete op.   7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R.Touch up the paintwork in the hinge area.  Refer to op.. 7025A14  Bonnet LID - R.R. Refer to op.. 7025A12  Engine front sound insulation COVER - R.R.