1036L14 CAMSHAFTS IN CAMSHAFT HOUSING - R.R. WITH CAMSHAFT HOUSING REMOVED - INCLUDES POSSIBLE. REPLACEMENT. OF CAMSHAFT HOUSING - Alfa - 156 - eLearn

3239103 - 1036L14 CAMSHAFTS in camshaft housing - R.R. with camshaft housing removed - Includes possible. Replacement. of camshaft housing

) 1. Position the upper cylinder head (1a) in the vice using the tool (1b).

	Name	Country
1b	Mount	1.860.470.001

1. Undo the bolts (1a) and remove the engine oil filler (1b).2. Remove the gasket.

1. Undo bolts (1a) and remove vacuum unit (1b).2. Remove the gasket.

1. Undo the bolts (1a) and remove the cam angle sensor (1b).

Check that the end float of the camshaft is within the recommended values using a dial gauge. If the end float of the camshaft is not within the recommended values, when reassembling the cylinder head, replace the worn components. 1. Remove the plugs (1a) and fit the camshaft timing tools (1b) in the upper cylinder head.

Check that the tools, marked with the letter 'A', are correctly inserted in the housings in the camshafts.

	Name	Country
1b	Gauge	1.870.896.900

1. Undo the camshaft gear fixing bolts.

1. Undo the bolt (1a) and remove the exhaust side camshaft toothed drive pulley (1b).

Remove the camshaft timing tools from the upper cylinder head.

	Name	Country
-	Gauge	1.870.896.900

1. Release the camshafts (1a) as necessary and remove the camshaft sprockets (1b).

1. Using a suitable drift, extract the inlet side camshaft (1a) and the plug (1b). 2. Using a suitable drift, extract the exhaust side camshaft (2a) and the oil seal (2b). Remove the exhaust side camshaft oil seal.

Refitting ( Removing

) Place the camshafts back in their housings.Place the camshaft gears back in their housings and secure them without tightening the bolts. 1. Fit the camshaft timing tools.

	Name	Country
1	Gauge	1.870.896.900

1. Tighten the camshaft sprocket fixing bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	-	-	-	-

1. Fit the front camshaft oil seal, exhaust side (1a) using the tool (1b).

	Name	Country
1b	Fitting tool	1.870.896.800

Fit the inlet side camshaft plug.Fit the exhaust side timing drive pulley and fix it with the bolt without tightening it. 1. Place the cam angle sensor (1a) back in its housing and secure it tightening the bolt (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	-	-	-	-

1. Place the vacuum unit (1a), complete with gasket (1b), back in its housing and secure it tightening the bolts (1c) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1c	-	-	-	-

1. Place the engine oil filler (1a), complete with gasket (1b), back in its housing and secure it tightening the bolts (1c) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	-	-	-	-

Remove the support tool, complete with upper cylinder head from the vice and separate them.