1088D14 UPPER SLEEVE FOR COOLANT INLET TO RADIATOR - R + R - Alfa - 156 - eLearn

3237633 - 1088D14 upper sleeve for coolant inlet to radiator - r + r

) Position the vehicle on the ramp. Proceed with removal - 1016A10 sound-proofing cover - r + r . Proceed with removal - 7055B54 under-engine guard - r r . 1. Loosen band and disconnect the upper coolant inlet hose to the radiator thermostat side.

Recover the coolant which comes out in a suitable container.

2. Disconnect the rapid connector for the upper coolant inlet hose to the radiator, radiator side, and remove it.

Manually press the springs and remove the rapid attachment for the hose.

Refitting ( Removing

) Refit the upper radiator coolant inlet hose and connect the rapid connector to the radiator.Connect the upper coolant inlet hose to the radiator, thermostat side, and tighten the band. Refill the engine cooling system with coolant - 0010T20 coolant change . Proceed with refitting - 7055B54 under-engine guard - r r . Proceed with refitting - 1016A10 sound-proofing cover - r + r . Remove the car from the ramps.