3238461 - 5540C24 motor (one) for l/h or r/h headlamp/light cluster alignment correction - r+r

Removing ( Refitting )  - 7025A12  Engine front sound insulation COVER - R.R. - 7025A14  Bonnet LID - R.R. 1. Open the bonnet lid and turn the motor (turn the left motor anticlockwise and the right motor clockwise), then remove.2. Disconnect the motor from the electrical connection.

	Name	Connector
2	Left headlamp alignment corrector motor	N30

	Name	Connector
2	Right headlamp alignment corrector motor	N31

Refitting ( Removing ) If necessary, check the operation of the motor and check that the headlamp movement rod travel is correct, for the various positions selectable.

	Measurement		Value
-	Rod travel (mm)	Pos. 1	0
Pos. 2	0.6
Pos. 3	1.44
Pos. 4	2.5

Connect the motor electrical connection.Insert the motor in its housing and turn it (turn the left motor clockwise and right motor anticlockwise).Check that the motor is working by operating the special switch from the passenger compartment, with the dipped headlamps switched on. See Op. 5540B38  headlamp/light cluster light beam - position  - 7025A14  Bonnet LID - R.R. - 7025A12  Engine front sound insulation COVER - R.R.