1056F82 INJECTION(IGNITION )SYSTEM 'SINGLE/ CONTROL UNIT - R.R. - Alfa - 156 - eLearn

3237744 - 1056F82 Injection(ignition )system 'single/ CONTROL UNIT - R.R.

) Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal.

	Name	Connector
-	Battery	A1B

1. Undo the nuts (1a) and remove the control unit protection (1b).

1. Disconnect the electrical connections (1a) and (1b) from the injection/ignition system control unit.

	Name	Connector
1a	Engine management ECU	M10A

	Name	Connector
1b	Engine management ECU	M10B

1. Undo the bolt (1a) and remove the bracket (1b) securing the fuel injection/ignition control unit.2. Remove the fuel injection/ignition control unit, withdrawing it from its support.

Refitting ( Removing

) .

If the injection/ignition control unit is replaced, initialise the new control unit - 1056F81 CARRYING OUT of SELF-LEARNING procedure for CONTROL UNIT (single) electronic injection/ignition .

Refit the fuel injection/ignition control unit in its seating and secure it with its bolt.Connect the electrical connections to the fuel injection/ignition control unit.Place the control unit protection back in its housing and secure it using the bolts.Connect the negative (-) battery terminal.