3237775 - 1036H14 valve tappets - check clearance
Dismantling
(
Reassembling
)
Position the vehicle on the ramp. - 4450B10 Front WHEEL (one) - R.R.
(left).
- 7055B42 Additional FRONT WHEEL ARCH (one), left or right
- R.R.
(right)
1. Undo the bolts (1a) and remove the tappet cover (1b).Act on the drive pulley bolt using a suitable
spanner so that the valves are in the closed position.2. With the engine cold, check, using a feeler gauge, that with
the valves in a closed position the clearance is within the recommended
values. | Measurement | Value | |
|---|---|---|---|
| 2 | Clearance (mm) | 0.25 - 0.35 |
| Measurement | Value | |
|---|---|---|---|
| 2 | Clearance (mm) | 0.30 - 0.40 |
Reassembling
(
Dismantling
)
1. Fit the tappet cover (1a) and fix it tightening the bolts (1b)
to the recommended torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 1b | Bolt | CAM COVER | M6 | 0.8 ÷ 1.0 |
