3237831 - 1064A50 sleeve joining turbo charger and exhaust pipe - r + r and replace seal
Removing
(
Refitting
)
Position the vehicle on the ramp.Raise the vehicle.1. Unscrew the bolts securing the sleeve connecting the turbocharger
and exhaust pipe on the exhaust pipe side.2. Straighten the edges of safety collar (2a), undo nuts (2b) and
remove the sleeve connecting the turbocharger and exhaust pipe (2c).3. Remove the seal.
Refitting
(
Removing
)
Fit the sleeve connecting the turbocharger
and the exhaust pipe.Fit the safety collar and tighten the nuts
securing the sleeve connecting the turbocharger and exhaust pipe on
the turbocharger side.Fit a new gasket and tighten the bolts
securing the sleeve between turbocharger and exhaust pipe, exhaust
pipe side, to the specified torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Bolt | SLEEVE TO EXHAUST PIPE | M8 | 2.0 - 2.5 |