3237836 - 1072C10 exhaust manifold - r + r and replace seal

Removing ( Refitting ) Position the vehicle on the ramp.1. Disconnect the vacuum intake pipe from the EGR valve.2. Unscrew the bolts securing the EGR valve to the exhaust manifold.3. Undo the three bolts indicated, which secure the turbocharger to the exhaust manifold.
1. Unscrew the turbocharger bracket nuts.Raise the vehicle.2. Undo bolts (2a) and remove turbocharger bracket (2b).
1. Undo nuts (1a) and remove the reinforcement bracket (1b).2. Undo the bolts (2a) and remove heat shield (2b) protecting the oil outlet pipe from the turbocharger.
1. Undo the bolts (1a) and remove collar (1b) supporting the front exhaust pipe section.
Remove the remaining bolt securing the turbocharger to the exhaust manifold.Lower the vehicle.1. Undo the nuts (1a) and remove exhaust manifold (1b) complete with gasket (1c).
Refitting ( Removing ) 1. Fit the exhaust manifold (1a), complete with a new gasket (1b), and fix it tightening the nuts (1c) to the recommended torque.

FasteningComponentØValue(daNm)
1cNutEXHAUST MANIFOLD/SM82.1 - 2.6
Raise the vehicle.Tighten the nut fixing the turbocharger to the exhaust manifold to the recommended torque.

FasteningComponentØValue(daNm)
-BoltTURBOCHARGERM82.1 - 2.6
Fit the collar supporting the front exhaust pipe section and secure with bolts.Fit the turbocharger oil outlet pipe protective heat shield and secure using the bolts.Fit the reinforcement bracket and fix it using the bolts.Fit the turbocharger bracket and secure it using the bolts.Lower the vehicle.Tighten the nuts securing the bracket to the turbocharger.1. Tighten the remaining bolts securing the turbocharger to the exhaust manifold to the specified torque.

FasteningComponentØValue(daNm)
1BoltTURBOCHARGERM82.1 - 2.6
2. Tighten the bolts securing the EGR valve to the exhaust manifold to the specified torque.

FasteningComponentØValue(daNm)
2BoltEGR VALVEM82.1 - 2.6
3. Connect the vacuum intake pipe to the E.G.R. valve.
Remove the car from the ramp.