3238078 - 3330D20 one-way valve for brake servo - r+r
Removing ( Refitting ) 1. Loosen the band and disconnect the air supply hose from the heat exchanger to the inlet manifold side inlet manifold.
Proceed with the removal
- 5530B10 battery - r+r
.
Proceed with the removal
- 5530B52 Battery DRIP TRAY/SUPPORT
- R.R.
.
1. Disconnect the brake servo vacuum pipe from the brake servo single-acting
valve.2. Remove the brake servo single-acting valve.
Refitting
(
Removing
)
Refit the brake servo single-acting valve.Connect the brake servo vacuum pipe to
the single-acting valve.
Proceed with the refitting
- 5530B52 Battery DRIP TRAY/SUPPORT
- R.R.
.
Proceed with the refitting
- 5530B10 battery - r+r
.
Conect the air supply hose from the heat
exchanger to the inlet manifold, inlet manifold side, and tighten
the band.