3238079 - 3330D24 vacuum pipe for brake servo - r+r
Removing ( Refitting ) Proceed with the removal - 5530B10 battery - r+r . Proceed with the removal - 5530B52 Battery DRIP TRAY/SUPPORT - R.R. . 1. Disconnect the brake servo vacuum pipe from the brake servo single-acting valve.
1. Loosen the band and disconnect the brake servo vacuum pipe from
the intake manifold.
1. Release the brake servo vacuum pipe from the fastenings and remove
it.
Refitting
(
Removing
)
Place the vacuum pipe for the brake servo
back in its housing and connect it.
Proceed with the refitting
- 5530B52 Battery DRIP TRAY/SUPPORT
- R.R.
.
Proceed with the refitting
- 5530B10 battery - r+r
.
Removing
(
Refitting
)
1. Loosen the band and disconnect the air supply hose from the heat
exchanger to the inlet manifold side inlet manifold and move aside.
Proceed with the removal
- 5530B10 battery - r+r
.
Proceed with the removal
- 5530B52 Battery DRIP TRAY/SUPPORT
- R.R.
.
1. Disconnect the brake servo vacuum pipe from the brake servo single-acting
valve.2. Release the vacuum pipe for the brake servo from the fastenings.3. Disconnect the E.G.R. system vacuum intake pipe from the brake
servo vacuum pipe.
1. Loosen the band and disconnect the brake servo vacuum pipe from
the vacuum unit.
Refitting
(
Removing
)
Refit the brake servo vacuum pipe, connect
to the vacuum pump and tighten the band.Connect the E.G.R. system vacuum intake
pipe to the brake servo vacuum pipe.Fix the vacuum pipe for the brake servo
to the securing band.Connect the brake servo vacuum pipe to
the single-acting valve.
Proceed with the refitting
- 5530B52 Battery DRIP TRAY/SUPPORT
- R.R.
.
Proceed with the refitting
- 5530B10 battery - r+r
.
Conect the air supply hose from the heat
exchanger to the inlet manifold, inlet manifold side, and tighten
the band.