Handbrake adjustment
must be made only after replacing:back brake padshandbrake control ropesback brake calipersas backlash recovery due to wear is automatic.Place the car on the lifting bridge.Remove handbrake guard.Lift the car.Disconnect handbrake control ropes from
brake calipers.Pull srongly the foot brake pedal at least
ten times.Connect handbrake control ropes to brake
calipers. Lower the car.Make handbrake control lever correspond
to the third release on the serrated sector.Tighten adjustment nut on handbrake lever
until back wheels stop.Check back wheels are free when lever
is in the rest position.Mount handbrake guard.Take the car off the lifting bridge.