4130B52 HEAT EXCHANGER PIPE - R+R - Alfa - 156 - eLearn

3238143 - 4130B52 heat exchanger pipe - r+r

) Position the vehicle on the rampDrain the power steering fluid from the reservoir using a suitable syringe.Disconnect the heat exchanger pipe oil inlet and outlet pipe.1. Remove the heat exchanger pipe after removing it from the relevant retaining bands.

Refitting ( Removing

) Place the heat exchanger pipe back in its housing and secure using the relevant bands.Connect the oil inlet and outlet pipe to the heat exchanger pipe.Fill the power steering circuit with the recommended fluid.

	Type	Component	Name	Qty.
-	Fluid	POWER ASSISTED STEERING CIRCUIT	TUTELA GI/A	-

The power steering system is self-bleeding; to bleed, turn the steering wheel full lock left and right with the engine running and the car stopped.With the front wheels raised off the ground, with the engine switched off turn the steering wheel to full lock, left and right, 4-5 times. Check and, if necessary, top up the fluid level in the reservoir. Position the vehicle on the ground and start up the engine.Carry out 4 - 5 complete steering wheel rotation cycles (right and left).Top up the fluid level in the reservoir.