4130B80 RETURN PIPE BETWEEN DUPLEX PIPE AND FLUID RESEVIOR R R - Alfa - 156 - eLearn

3238152 - 4130B80 return pipe between duplex pipe and fluid resevior r r

) Position the vehicle on the ramp Drain the power steering fluid from the reservoir using a suitable syringe. - 5530B10 battery - r+r - 5530B52 Battery DRIP TRAY/SUPPORT - R.R. - 4450B10 Front WHEEL (one) - R.R. - 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R.1. Pull up the left front wheel arch partly - 1008A42 gear box left rigid mount - r r - 1008B30 gearbox side mount flexible block - replace2. Loosen the collars and remove the rigid return pipe between heat exchanger and fluid reservoir.

Refitting ( Removing

) Fit and connect the rigid return lines between heat exchanger and fluid reservoir. - 1008B30 gearbox side mount flexible block - replace - 1008A42 gear box left rigid mount - r rRefit the left wheel arch in its housing and secure. - 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R. - 4450B10 Front WHEEL (one) - R.R. - 5530B52 Battery DRIP TRAY/SUPPORT - R.R. - 5530B10 battery - r+rFill the power steering circuit with the recommended fluid.

	Type	Component	Name	Qty.
-	Fluid	POWER ASSISTED STEERING CIRCUIT	TUTELA GI/A	-

Bleed the power steering system as described belowWith the front wheels raised off the ground, with the engine switched off turn the steering wheel to full lock, left and right, 4-5 times. Check and, if necessary, top up the fluid level in the reservoir. Position the vehicle on the ground and start up the engine.Carry out 4 - 5 complete steering wheel rotation cycles (right and left).Top up the fluid level in the reservoir.