3237417 - 0010T67 hydraulic clutch system bleed air

Proceed with removal  Refer to op.. 1016A10  sound-proofing cover - r + r . 1. Connect the tool to the brake-clutch fluid reservoir.

NameCountry
1Brake/clutch bleeding equipment1.806.097.001
Proceed with removal  Refer to op.. 5530B10  battery - r+r . Proceed with removal  Refer to op.. 5530B52  Battery DRIP TRAY/SUPPORT - R.R. . 2. Remove protective cap (2a) and connect recovery device (2b) to the bleed valve on the hydraulic clutch control actuator. 3. Lift the retaining clip (3a) and withdraw the bleed device (3b) as much as necessary.4. Slowly open the fluid reservoir cock.Wait until all the air contained in the hydraulic clutch disengagement system has come out. Refit the bleed system in its seating, secure it with the retaining clip and refit the protective cap in its seating.
Remove the collection system.Remove the bleed equipment.

NameCountry
-Brake/clutch bleeding equipment1.806.097.001
Proceed with refitting  Refer to op.. 5530B52  Battery DRIP TRAY/SUPPORT - R.R. . Proceed with refitting  Refer to op.. 5530B10  battery - r+r . Check correct clutch disengagement and gear engagement.Check the fluid level in the brake - clutch reservoir is correct. Proceed with refitting  Refer to op.. 1016A10  sound-proofing cover - r + r .