3237450 - 1008B20 power unit intermediate mount flexible block - replace
Removing
(
Refitting
)
Position the vehicle on the ramp.
Proceed with removal
- 7055B54 under-engine guard -
r r
.
Proceed with removal
- 1076B70 exhaust pipe between
pre-catalytic converter and catalytic converter - r r
.
Proceed with removal
- 1008A44 rear rigid mount - r r
.
1. Undo the bolts (1a) and remove the flexible mounting for the
power unit rear support (1b). 
Refitting
(
Removing
)
1. Place the flexible mounting for the power unit rear support (1a)
back in its housing and secure it by tightening the bolts (1b) to
the recommended torque.  | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 1b | Bolt | INTERM RUBBER MOUNT | M8 | (Front suspension crossmember side) 3.3 ÷ 3.9 |
