3238414 - 5520B10 starter motor - r+r

Removing ( Refitting ) Position the vehicle on the rampEnsure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with removal  - 7055B54  under-engine guard - r r . Proceed with removal  - 1076B70  exhaust pipe between pre-catalytic converter and catalytic converter - r r . 1. Open the cover, undo the nuts and disconnect the electrical connections from the starter motor.

	Name	Connector
1	Starter' motor	A20

1. Undo the bolts (1a) and remove the starter motor (1b). Refitting ( Removing ) Refit the starter motor in its housing and fix it tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	-	-	-	-

Connect the electrical connections to the starter motor and fix them using the nuts.Close the protective cover. Proceed with refitting  - 1076B70  exhaust pipe between pre-catalytic converter and catalytic converter - r r . Proceed with refitting  - 7055B54  under-engine guard - r r . Connect the negative (-) battery terminalRemove the car from the ramps.