3237519 - 1040A74 inertia switch for electric pump supply circuit r + r

Removing ( Refitting ) Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

NameConnector
-Battery  A1B 
1. Undo the bolts (1a) and remove protector (1b) from the inertia switch under the driver's seat. 2. Undo the inertia switch bolts for the electric pump feed circuit cut-out. 3. Remove the inertia switch for electric pump feed cut-out (3a) after disconnecting electrical connection (3b).

NameConnector
3bInertia switch  I50 
Refitting ( Removing ) Connect the electrical connection to the inertia switch for electric pump feed circuit cut-out, then place it back in it housing and fix it using the bolts. Place the inertia switch back in its housing and fix it using the bolts.Connect the negative (-) battery terminal.