1060E40 SUPPLEMENTARY PRESSURE PUMP - R R - Alfa - 156 - eLearn

3237797 - 1060E40 supplementary pressure pump - r r

) Position the vehicle on the ramp. Proceed with removal - 4450B04 right front wheel r r . Proceed with removal - 7055B54 under-engine guard - r r . Proceed with removal - 7055B91 Right front WHEEL ARCH LINER - R.R. . Proceed with removal - 7055B66 Engine compartment DUST SHIELD protection in right front wheel arch - R.R. . Proceed with removal - 1092G10 single engine belt r r . Proceed with removal - 1092A10 Crankshaft services PULLEY - R.R. . Proceed with removal - 1092G21 engine component single belt fixed tensioner - r rwith belt removed . Proceed with removal - 1016A10 sound-proofing cover - r + r . Proceed with removal - 1008C10 power unit upper reaction link r r . Proceed with removal - 1032D12 timing system protective cover(s) - r + r . Proceed with removal - 1032B10 toothed timing belt - r + r for timing adjustment or replacement . Proceed with removal - 1060E30 pressure pump pulley - r r . Proceed with removal - 1060E10 pressure pump - r r . Proceed with removal - 1060G70 vacum tank for controlling engine air intake r r . Proceed with removal - 1080D34 engine oil vapour separator - r + r . Proceed with removal - 1084A16 oil dip stick pipe - r r . 1. Undo the bolts securing the rigid coolant return pipe to the coolant supply reservoir.

1. Undo the bolts (1a) and remove the power steering pump drive pulley (1b).

1. Undo the bolts fixing the power assisted steering pump and move it back as far as necessary.

1. Undo the bolts (1a) and remove the pressure pump mounting (1b).

Refitting ( Removing

) 1. Place the pressure pump mounting (1a) back in its housing and fix it tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	INJECTION PRESSURE PUMP MOUNT	M8	(Engine crankcase side) 2.3 ÷ 2.8

1. Place the power assisted steering pump back in its housing and fix it tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1	Bolt	POWER STEERING PUMP	M8	(Support side) 2.3 ÷ 2.8

1. Place the power assisted steering pump pulley (1a) back in its housing and fix it tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	POWER STEERING PUMP DRIVE PULLEY	M8	(Power assisted steering pump side) 2.3 ÷ 2.8

Undo the bolts securing the rigid coolant return pipe to the coolant supply reservoir. Proceed with refitting - 1084A16 oil dip stick pipe - r r . Proceed with refitting - 1080D34 engine oil vapour separator - r + r . Proceed with refitting - 1060G70 vacum tank for controlling engine air intake r r . Proceed with refitting - 1060E10 pressure pump - r r . Proceed with refitting - 1060E30 pressure pump pulley - r r . Proceed with refitting - 1032B10 toothed timing belt - r + r for timing adjustment or replacement . Proceed with refitting - 1032D12 timing system protective cover(s) - r + r . Proceed with refitting - 1008C10 power unit upper reaction link r r . Proceed with refitting - 1016A10 sound-proofing cover - r + r . Proceed with refitting - 1092G21 engine component single belt fixed tensioner - r rwith belt removed . Proceed with refitting - 1092A10 Crankshaft services PULLEY - R.R. . Proceed with refitting - 1092G10 single engine belt r r . Proceed with refitting - 7055B66 Engine compartment DUST SHIELD protection in right front wheel arch - R.R. . Proceed with refitting - 7055B91 Right front WHEEL ARCH LINER - R.R. . Proceed with refitting - 7055B54 under-engine guard - r r . Proceed with refitting - 4450B04 right front wheel r r . Remove the car from the ramps.