3237812 - 1060G20 Engine RPM SENSOR - R.R.

Removing ( Refitting ) Position the vehicle on the ramp.Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

NameConnector
-Battery  A1B 
Proceed with removal  - 7055B54  under-engine guard - r r . 1. Disconnect the electrical connection for the rpm sensor.

NameConnector
1Rpm sensor  K46 
2. Undo the bolt (2a) and remove the engine rpm sensor (2b).
Refitting ( Removing ) Place the engine rpm sensor back in its housing and fix it using the bolt. Connect the electrical connection for the rpm sensor. Proceed with refitting  - 7055B54  under-engine guard - r r . Connect the negative (-) battery terminal.Remove the car from the ramps.