3237817 - 1060G42 clutch pedal switch - r r

Removing ( Refitting ) Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

NameConnector
-Battery  A1B 
Remove the sound-proofing protection.Disconnect the electrical connection from the switch on the clutch pedal.

NameConnector
-Clutch pedal switch  I31 
Turn the switch clockwise through 90 degrees and remove. Refitting ( Removing ) Press the clutch pedal, then refit the clutch pedal switch and turn through 90 degrees anticlockwise until it clicks home on the detent ridge. Release the clutch pedal and pull back to the end of its travel (rest position).
If the switch is not fully back, it could hold the clutch pedal in an advanced position.
Press the clutch pedal through its full travel to allow the switch to settle. Connect the electrical connection to the switch on the clutch pedal. Place the rubber protection back in its housing.Connect the negative (-) battery terminal.