1084A22 ENGINE OIL FILLER - R R - Alfa - 156 - eLearn

3237867 - 1084A22 engine oil filler - r r

) Proceed with removal - 1016A10 sound-proofing cover - r + r . Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

Disconnect the electrical connection from the engine coolant temperature sensor.

	Name	Connector
-	Engine temperature sender unit	K36

1. Loosen the band and disconnect the engine oil vapour recovery pipe from the engine oil filler.2. Undo the bolts (2a) and remove the engine oil filler (2b). 3. Remove the gasket.

Refitting ( Removing

) Place the engine oil filler, complete with gasket, back in its housing and secure it tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	-	-	-	-

Connect the oil vapour recovery pipe to the engine oil filler and tighten the band. Connect the electrical connection to the engine coolant temperature sensor. Connect the negative (-) battery terminal. Proceed with refitting - 1016A10 sound-proofing cover - r + r .