3239195 - Introduction - POWER UNIT SUPPORTS
The power unit mounting is of the "suspended" type.The unit is attached to the bodywork by means of two mountings (1) (aluminium) with rubber buffers (2); a third (steel), caliper type (3), attaches to the steering subframe. To limit jolting, the engine is connected to the bodywork at the top by means of a counterbrace (4).
SPECIFCATIONS
OPERATION
The power unit supports have the function of supporting the power unit and 'damping' the vibrations through specal flexible mountings and a reaction rod.COMPOSITION
STRUCTURE
The power unit mounting is of the 'suspended' type.The unit is fixed to the bodyshell by means of three supports with flexible damping mountings:
- a rear steel one which connects the engine to the flexible mounting fastened to the front suspension crossmember
- a gearbox side steel one which connects the power unit to the flebile mounting fastened to the bodyshell and a strengthening rod connected to the gearbox
- a timing side aluminium one which connects the power unit to the flexible mounting fastened to the bodyshell
