3233145 - Q06 SUN ROOF DOES NOT STOP IN END OF TRAVEL POSITION

When the control is operated, the sun roof opens/closes normally, but does not stop correctly in the opening, hinged opening or closing positions

		Results of the tests
1	CONTROL DEVICE ALIGNMENT CHECK	All OK	Problems met	Operation
	Remove the glass Op.   7030B18  and check that the slides and the guides are correctly aligned	Continue to Step 2	Faulty fitting of the sunroof	Refit the sunroof correctly Op.   7030B54
2	SUN ROOF END OF TRAVEL DEVICE CHECK	All OK	Problems met	Operation
	Check the condition of the end of travel switch and the control cam, located on the motor	Continue to Step 3	End of travel device faulty	Renew the connections or replace the motor Op.   7030B70
3	CHECK CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists	Search for the fault starting from another symptom'