7210B40 R.R. REAR WHEEL ARCH LINER - Alfa - 156 - eLearn

3239035 - 7210B40 R.R. REAR WHEEL ARCH LINER

) - 7210E51 left rear wing . - 7210B35 R.R. REAR OUTER WHEEL ARCH . Check if any of the connected parts are deformed by checking body alignment dimensions. Use appropriate measurement tools (reference rigs, templates or gauges).Straighten the body if necessary.

1. Remove the PVC treatment from the door sill to expose the spot welds using a vibrating cutter and appropriate blade.2. Drill out weld points in the areas shown in the figure.

1. Use a chamfering machine to crop the weld spots indicated in the figure.2. Drill out spot welds in the areas shown in the figure.3. Use a chisel and mallet to remove the inner wheel arch.

1. Make equidistant holes as shown in the figure.Straighten the panel edges using a mallet and profiled stake.Use a grinding wheel to remove the weld spot residues.2. Apply electroweldable paint finish to the panel edges shown in the figure.

1. Working at the bench, use a rotary brush to remove the corrosion-proofing from the panel edges shown in the figure.2. Apply electroweldable paint finish to the panel edges shown in the figure.

Refitting ( Removing

) 1. Position the part on the car and secure using self-locking clips.2. Use a spot welder to weld the roof panel in the areas shown in the figure.3. Use a MIG welder to fill the holes made previously.

1. Apply rust-proofing to newly-welded areas.2. Seal the areas indicated in the figure.Restore the PVC treatment.3. Apply sound-deadening panels.Apply paint.

- 7210B35 R.R. REAR OUTER WHEEL ARCH . - 7210E51 left rear wing .