|  |  | Results of the tests | 
| 0 | PRELIMINARY CHECKS | All OK | Problems met | Operation | 
|---|
|  | Check
that neither the rear window nor door mirror demisters work | Continue to Step 
                              1 | Only the  rear window
does not work | See table 
                                 J21 | 
| Only the door mirrors do not work | See table 
                                 J22 | 
| 1 | CHECKING DEMISTER ACTIVATION LED | All OK | Problems met | Operation | 
|---|
|  | When
the button on the climate control panel is pressed, check that the
led on the button comes on to indicate that the function is activated. | Continue to Step 
                              2 | Demister led does not
come on | Restore
the connection between climate control unit and service control
unit
                              (
                               See   E3020  WINDSCREEN WASH/WIPE 
                              ).
                           
                              Continue
to Step 
                               3 | 
| 2 | DEMISTING ELECTRICAL CIRCUIT CHECK | All OK | Problems met | Operation | 
|---|
|  | Check, in order: (
                               See   E3030  HEATED REAR WINDSCREEN AND DOOR MIRROR DEFROSTING 
                              ).heated rear windscreen fuseheated rear windscreen relayconnection between heated rear window relay and service
control unitservices control unit supply
 | Continue to Step 
                              3 | Connections not correct | Restore the connections | 
| Component defective | Replace the component involved (if a fuse is involved,
search for the cause of the problem) | 
| 3 | SERVICES CONTROL UNIT CHECK | All OK | Problems met | Operation | 
|---|
|  | Check
that the services control unit is working properly, in particular
the rear window and door mirror demister function; 
                               see DESCRIPTION AND OPERATION: 5505 ELECTRICAL CIRCUIT FOR INSTRUMENTS/INDICATORS | Continue to Step 
                              4 | Control unit not working | Replace the services control
unit 
                               Op.   5505A18 | 
| 4 | CHECK CORRECT OPERATION | All OK | Problems met | Operation | 
|---|
|  | Check
that the fault is no longer present | End of diagnosis | Fault persists | Search for the
fault starting from another symptom' |