3233097 - K63 HANDBRAKE WARNING LIGHT OFF / (DO NOT CARRY OUT INITIAL TEST)
On starting, the "handbrake" warning light does not come on (it should come on for 2 seconds to indicate the initial test of the control unit, and then go out)|  | The "low brake fluid" and "handbrake on" warning light, it also indicates an EBD function fault if it comes on at the same time as the ABS warning light | 
| Results of the tests | ||||
| 1 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation | 
|---|---|---|---|---|
| Connect the diagnostic equipment (Examiner or other instruments) to the diagnostic socketCheck that there is a regular dialogue with the ABS control unit | Continue to Step 2 | Lack of dialogue with the control unit | Restore: 
 | |
| An error is detected in the control unit | Continue according to the instructions for the diagnostic equipment | |||
| 2 | CHECKING CHECK CONTROL POWER SUPPLY | All OK | Problems met | Operation | 
| Check, in order: 
 | Continue to Step 3 | Connections not correct | Restore the connections | |
| Component defective | Replace the component involved (if a fuse is involved, search for the cause of the problem) | |||
| 3 | CHECK CONTROL CHECK | All OK | Problems met | Operation | 
| Check the operation of the check control instrument see DESCRIPTION AND OPERATION: 5560 INSTRUMENT PANEL | Continue to Step 4 | Instrument not working | Replace the check control instrument Op. 5560C60 | |
| 4 | CHECK CORRECT OPERATION | All OK | Problems met | Operation | 
| Check that the fault is no longer present | End of diagnosis | Fault persists | Search for the fault starting from another symptom' | |