3237538 - 1056B62 l/h and r/h fuel pipe assembly - with injectors - r + r

Removing ( Refitting ) - 1072B42 left hand or right hand inlet manifold (one) - r+r

Before any interventions on components of the fuel system, discharge the pressure in the system using tool N. 1.870.684.000 connected to the specific valve located on the fuel distribution manifold.

1. Disconnect the fuel inlet hose, then plug to prevent fuel escaping.2. Disconnect the electrical connections from the injectors.

	Name	Connector
2	Injector	N70

3. Undo the bolts (3a) and remove the complete fuel pipe (3b) complete with fuel injectors (3c). Refitting ( Removing ) Fit the fuel pipe, complete with fuel injectors, and tighten its bolts to the specified torque to secure.

Check that the fuel injectors are positioned correctly in their seatings.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	FUEL PIPE ASSEMBLY	M6	0.6 - 0.8

Connect the electrical connections to the injectors.Connect the fuel supply pipe.- 1072B42 left hand or right hand inlet manifold (one) - r+r