5010A16 HEATER/ENGINE LINE - R R - Alfa - 156 - eLearn

3238245 - 5010A16 heater/engine line - r r

) - 1048A34 sleeve(s) from flow meter to air supply capacity case - r + rPosition a suitable container for recovering the coolant fluid.1. Loosen the pipe retaining bands.2. Disconnect the pipe and remove it.

Refitting ( Removing

) Check that the pipe is not damaged and that there are no cracks which would affect the seal.Reposition the pipe and connect it to the connectors.If necessary, lubricate the ends of the pipes using vaseline to facilitate the refitting.

The heater water supply and return pipes have white or green coloured ends to prevent them from being incorrectly fitted after operations where they are both removed.

Tighten the pipe retaining bands. - 1048A34 sleeve(s) from flow meter to air supply capacity case - r + rRefill the engine cooling circuit using the recommended fluid.

	Type	Component	Name	Qty.
-	Fluid	COOLANT LEVEL CHECK AND TOP UP	Alfa Romeo Climafluid Super Permanent -40°C	-