3237811 - 1060G18 fuel temperature sensor - r r

Removing ( Refitting ) Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op.   5530B10  battery - r+r ).

	Name	Connector
-	Battery	A1B

1. Disconnect the electrical connection from the fuel temperature sensor.

	Name	Connector
1	Fuel temperature sensor	K81

2. Undo and remove the fuel temperature sensor from the fuel return manifold pipe. Refitting ( Removing ) Fit the fuel temperature sensor to the fuel return manifold hose and tighten it to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	-	PIPES ON DEHYDRATING FILTER	M12	1.3 - 1.6

Connect the electrical connection to the fuel temperature sensor.Connect the negative (-) battery terminal.