4130B82 RETURN PIPE BETWEEN RIGID INTERMEDIATE RETURN PIPE TO FLUID RESEVIOR R R - Alfa - 156 - eLearn

3238153 - 4130B82 return pipe between rigid intermediate return pipe to fluid resevior r r

) Place the vehicle on a ramp.Drain the power steering fluid from the reservoir using a suitable syringe. - 5530B10 battery - r+r - 5530B52 Battery DRIP TRAY/SUPPORT - R.R.Disconnect the rubber pipe from the rigid return pipe to the fluid reservoir, rigid pipe side.1. Undo the bolts (1a) and raise the power steering fluid reservoir (1b).2. Disconnect and remove the rubber pipe from the rigid return pipe to the fluid reservoir from the tank.

Refitting ( Removing

) Place the rubber pipe from the rigid return pipe to the fluid reservoir back in its housing and connect to the tank.Refit in its seating the power steering fluid reservoir and secure it with its bolts. Connect the rubber pipe from the fluid reservoir rigid return pipe to the fluid tank, rigid pipe side. - 5530B52 Battery DRIP TRAY/SUPPORT - R.R. - 5530B10 battery - r+rFill the power steering circuit with the recommended fluid.

	Type	Component	Name	Qty.
-	Fluid	POWER ASSISTED STEERING CIRCUIT	TUTELA GI/A	-

Bleed the power steering system as described belowWith the front wheels raised off the ground, with the engine switched off turn the steering wheel to full lock, left and right, 4-5 times. Check and, if necessary, top up the fluid level in the reservoir. Position the vehicle on the ground and start up the engine.Carry out 4 - 5 complete steering wheel rotation cycles (right and left).Top up the fluid level in the reservoir.