5020L28 PIPE FROM BOILER TO HEATER - R R - Alfa - 156 - eLearn

3238300 - 5020L28 pipe from boiler to heater - r r

) - 7055B54 under-engine guard - r r1. Working underneath the engine compartment, undo the bolts fixing the bracket.2. Remove the bracket.3. Undo the nuts fixing the flange.4. Move the exhaust pipe to the side and fix it temporarily.

Place a suitable container for collecting the coolant under the right side of the radiator.1. Loosen the band securing the right radiator pipe.2. Disconnect the right radiator pipe and drain the coolant.

1. Undo the nut.2. Unscrew the bolt.3. Recover the flexible engine mounting.

1. Disconnect the front earth loom for the heater.

	Name	Connector
1	Earth cable loom for additional heater	C41

2. Disconnect the electrical connections (2a, 2b, 2c) for the spark plugs (press fit).

	Name	Connector
2a	Additional heater resistance	O25A

	Name	Connector
2b	Additional heater resistance	O25B

	Name	Connector
2c	Additional heater resistance	O25C

3. Undo the nut.4. Move the heater (4a) slightly and loosen the bands (4b).5. Remove the pipe.

Refitting ( Removing

) Check that the heater pipe is not damaged.Connect the pipe and secure it using the bands.Position the heater and tighten the nut.Connect the electrical connections to the spark plugs (press fit).Connect the front earth loom.Position the flexible engine mounting, then secure it using the nut and the bolt.Connect the right radiator pipe and secure it using the band.Position the exhaust pipe and tighten the nuts fixing the flange.Position the bracket and fix it using the bolts.Refill the engine cooling circuit using the recommended fluid.

	Type	Component	Name	Qty.
-	Fluid	ENGINE COOLING CIRCUIT	Alfa Romeo Climafluid Super Permanent - 40 °C	-

Visually inspect that there are no leaks from the cooling circuit. - 7055B54 under-engine guard - r rCheck that the additional heating system is working properly.