| | Results of the tests |
| 1 | CHECK CONTROL CABLE TRAVEL | All OK | Problems met | Operation |
|---|
| Check
that the return travel of the control cables is unhindered |
Continue to Step
2
| Control cables do not
run freely | Restore correct operation |
| Cable damaged or broken |
Replace the cable
Op. 3380A30 |
| Linkage damage or broken |
Replace the linkage
Op. 3380A38 |
| Guard damaged or broken |
Replace the guard
Op. 3380A44 |
| 2 | CHECK OPERATING LEVER BUTTON | All OK | Problems met | Operation |
|---|
| Check
that the operating lever release button returns freely |
Continue to Step
3
| Incorrect adjustment |
Dismantle and free the button;
if necessary, replace the operating lever
Op. 3380A10 |
| 3 | CHECK ATTACHMENT OF CABLE
TO REAR BRAKE | All
OK | Problems
met | Operation |
|---|
| Check
that the cable is attached correctly to the rear brake caliper |
Continue to Step
4
| Cable attached incorrectly |
Restore the correct attachment
of the cable to the brake caliper
Op. 3380A30 |
| 4 | CHECK SELF-ADJUSTER | All OK | Problems met | Operation |
|---|
| Check
that the handbrake play take-up device is working properly |
Continue to Step
5
| Rear brake caliper faulty |
Replace the rear brake caliper
concerned
Op. 3310B34 |
| 5 | CHECK CORRECT OPERATION | All OK | Problems met | Operation |
|---|
| Check
that the fault is no longer present | End of diagnosis | Fault persists | Search for the
fault starting from another symptom' |