K10 DOORS OPEN CHECK NOT WORKING - Alfa - 156 - eLearn

When the doors open (one or more), the warning on the Infocenter is not activated.

0	PRELIMINARY CHECKS	All OK	Problems met	Operation
		Results of the tests
	Check operation of central locking	Continue to Step 1	Central door locking not working either	See table P10
1		All OK	Problems met	Operation
	Check:: service fuse ignition-operated service fuse supply to check instrument earth for check instrument connections between check and lock switches connection between check and boot switch earth for lock switches ( See E4020 REV COUNTER INSTRUMENT ).	Continue to Step 2	Component defective	Replace the component involved (if a fuse is involved, search for the cause of the problem)
		Continue to Step 2	Connections broken	Restore connections
2	CHECK LOCK SWITCHES	All OK	Problems met	Operation
	Check that the door lock switches are working	Continue to Step 3	Fault in front door switches	Check and if necessary replace the door lock motors Op. 7005N21
			Fault in rear door switches	Check and if necessary replace the door lock motors Op. 7010N21
			Central door locking not working either	See table P10
3	CHECK ON CHECK INSTRUMENT	All OK	Problems met	Operation
	Check the operation of the check instrument see DESCRIPTION AND OPERATION: 5560 INSTRUMENT PANEL	Continue to Step 4	Instrument not working	Replace check instrument Op. 5560C60
4	CHECKING CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists	Search for the fault starting from another symptom'

When the doors open (one or more), the warning on the Infocenter is not activated.

0	PRELIMINARY CHECK	All OK	Problems met	Operation
		Results of the tests
	Check that the courtesy light works when the door switches are operated.	Continue to Step 2	Fault in courtesy light	Continue to Step 1
1	CHECKING CONTINUITY	All OK	Problems met	Operation
	Check the correct electrical connection of the switches on doors between earth point and dashboard / Infocenter junction. If the warning is issued when only one door is opened, check the individual electrical branch. See E4024 INFOCENTER INSTRUMENT	Continue to Step 2	Connections not correct.	Renew the electrical connection.
		Continue to Step 2	Switch positioned incorrectly or faulty.	Renew or replace the door switch.
2	CHECK THE CORRECT INSTRUMENT OPERATION	All OK	Problems met	Operation
	Check the correct operation of the door open indicator on the Infocenter	Continue to Step 3	Infocenter faulty	Replace Infocenter.
3	CHECKING CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists	Search for the fault starting from another symptom'