| | Results of the tests |
| 1 | POLLEN FILTER CHECK | All OK | Problems met | Operation |
|---|
| Check
the condition of the pollen filter | It should be remembered that the
pollen filter should be replaced about once a year. |
|
Continue to Step
2
| Filter obstructed |
Replace the pollen filter
Op. 5010B09 |
| 2 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|
| Connect
the diagnostic equipment (Examiner or other instruments) to the
diagnostic socket- Check that there are no faults
in the climate control control unit
|
Continue to Step
3
| An error is detected in
the control unit | Continue according to the instructions for the diagnostic
equipment |
| Lack of dialogue with the control unit | Restore: - the
connection between the climate control control unit and the diagnostic connector
- the
climate control control unit supply.
(
See E6020 AIR CONDITIONING
).
|
| 3 | ACTIVE DIAGNOSIS WITH DIAGNOSTIC
EQUIPMENT | All
OK | Problems
met | Operation |
|---|
| Using
the diagnostic equipment (Examiner or other instruments), carry
out the active diagnosis for the electric fan at the different speeds |
Continue to Step
4
| Electric fan faulty |
Replace the electric fan
Op. 5040C30 |
| Electronic speed variator faulty |
Replace the electronic speed variator
Op. 5040C44 |
| 4 | CHECKING THE AIR DUCTS | All OK | Problems met | Operation |
|---|
| Check
that the air ducts inside the dashboard and the vents are intact
and there are no obstructions |
Continue to Step
5
| Ducts obstructed or damaged | Restore the operation of
the ducts and the vents PROCEDURE — Cmp. 5010B. |
| 5 | CHECK CORRECT OPERATION | All OK | Problems met | Operation |
|---|
| Check
that the fault is no longer present | End of diagnosis | Fault persists | Search for the
fault starting from another symptom' |