P11 CENTRAL LOCKING / NOT WORKING WITH REMOTE CONTROL - Alfa - 156 - eLearn - 4CarData

3233141 - P11 CENTRAL LOCKING / NOT WORKING WITH REMOTE CONTROL

When the central locking is operated using the remote control the doors do not open / close at all.

0	PRELIMINARY CHECKS	All OK	Problems met	Operation
		Results of the tests
	Check the charge of the remote control battery incorporated in the keyCheck the correct operation of the central locking using the key	Continue to Step 1	Remote control battery charge low	Replace battery
		Continue to Step 1	The central locking does not work with the key either	See table P10
1	CENTRAL LOCKING ELECTRICAL CIRCUIT CHECK	All OK	Problems met	Operation
	Check, in order: remote control receiver supply connection between services control unit and remote control receiver correct operation of remote control receiver See E3040 CENTRAL LOCKING	Continue to Step 2	Connections not correct	Restore connections
			Component defective	Replace the component involved (if a fuse is involved, search for the cause of the problem)
			Receiver not working	Replace the receiver Op. 5080E30
2	CORRECT OPERATION CHECK	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists	Search for the fault starting from another symptom'

When the central locking is operated using the remote control the doors do not open / close at all.

0	PRELIMINARY CHECKS	All OK	Problems met	Operation
		Results of the tests
	Check the charge of the remote control incorporated in the keyCheck that the central locking is working properly using the key	Continue to Step 1	Remote control battery run down	Replace battery
		Continue to Step 1	Central locking mechanical fault	See table P10 CENTRAL LOCKING
1	REMOTE CONTROL RECEIVER CHECK	All OK	Problems met	Operation
	Check the supply, earth and connections with the integrated electric windows central locking control unit	Continue to Step 2	Connections damaged	Restore the correct connections
		Continue to Step 2	Component defective	Replace the alarm remote control receiver
2	CENTRAL LOCKING ELECTRICAL CIRCUIT CHECK	All OK	Problems met	Operation
	Check, in order: central locking fuse, located in service control unit connection between service control unit and junction unit control unit supply ( See E3040 CENTRAL LOCKING )	Continue to Step 3	Component defective	Replace the component involved (if a fuse is involved, search for the cause of the problem)
		Continue to Step 3	Connection damaged	Restore connections
3	INTEGRATED ELECTRIC WINDOWS CENTRAL LOCKING ELECTRONIC CONTROL UNIT CHECK	All OK	Problems met	Operation
	Check that the integrated electric windows central locking control unit is working properly	Continue to Step 4	Control unit not working	Replace integrated electric windows central locking control unit ( Op. 5505A18 )
4	CORRECT OPERATION CHECK	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists	Search for the fault starting from another symptom'