| | Results of the tests |
| 0 | PRELIMINARY CHECKS | All OK | Problems met | Operation |
|---|
| Firstly
check the moving window glass is properly closed.
Check that the noise is actually coming from one of the front
doors by carrying out the preliminary check for locating noises
See Test 70A Location of wind noise (preliminary location) |
Continue to Step
1
| The wind noise comes from another
area | Check
the diagnostic table corresponding to the area located. |
| 1 | CHECK THE DUST SEALING STRIP
ON THE DOOR | All
OK | Problems
met | Operation |
|---|
| Check
the wind/dust seal is properly fitted |
Continue to Step
2
| Faulty fitting of seal |
Fit the sealing strip correctly
Op. 7005A46 |
| 2 | FRONT DOOR WIND NOISE LOCATION CHECK | All OK | Problems met | Operation |
|---|
|
Carry
out the detailed check for locating wind noise from the front doors
See Test 7005A Location of front door wind noises
and identify the
area where the noise is coming from.
| No wind noise is located
Continue to Step
3
| The noise persists with
the entire door taped | Check for sealant between the wing and the
pillar under the wheel arch |
| The wind noise is coming from the area between the pillar
and the windscreen |
Check the condition of the door compartment seal in that
area and ensure it is bonded properly to the body
Op. 7005A34 |
| The wind noise is coming from the area between the door
and the windscreen |
Check the condition of the door compartment seal in that
area and ensure it is bonded properly to the body
Op. 7005A34 |
| The wind noise is coming from the area between the door
and the windscreen |
Adjust the door hinges
Op. 7005A14
.
|
| The wind noise is coming from the area between the door
and the wing |
Adjust the door hinges
Op. 7005A14 |
| The wind noise comes from the glass scraper area |
Check the glass scraper is undamaged and correctly fitted
Op. 7005D26 |
| The wind noise is coming from the mirror |
Check the condition of the seal between mirror and door
and make sure it is correctly fitted. Adjust or replace the actual
mirror
Op. 7005R30 |
| 3 | CHECK CORRECT OPERATION | All OK | Problems met | Operation |
|---|
| Check
that the fault is no longer present | End of diagnosis | Fault persists | Search for the
fault starting from another symptom' |