3233185 - T05 BONNET WIND NOISE
With the vehicle moving, there is noise coming from the front of the passenger compartment.| Results of the tests | ||||
| 0 | PRELIMINARY CHECKS | All OK | Problems met | Operation |
|---|---|---|---|---|
| Preliminarily check that the bonnet is properly closed Check that the noise is actually coming from the bonnet lid by carrying out the test for locating the noise See Test 70A Location of wind noise (preliminary location) | Continue to Step 1 | The wind noise comes from another area | Check the diagnostic table corresponding to the area located. | |
| 1 | CHECK LOCATION OF NOISE FROM BONNET LID | All OK | Problems met | Operation |
| Carry out the detailed test for locating noise from the bonnet lid See Test 7025A Location of bonnet wind noise and identify the area where the noise is coming from. | No wind noise is located Continue to Step 2 | The noise is coming from the side of the bonnet | Check the foam blocks at the point where the bonnet and wings fit together at the rear Check the condition of the wind seal and make sure it is properly fitted Op. 7025A62 | |
| The wind noise is coming from the area of the shield | Check for the presence of a seal between bonnet and radiator shield Op. 7055A40 | |||
| The noise is coming from the front of the bonnet | Check the condition of the front wind seal and make sure it is properly fitted Op. 7025A62 | |||
| 2 | FLAME DAMPER CHECK | All OK | Problems met | Operation |
Check the flame damper partition. In particular, ascertain:
| Continue to Step 3 | Flame damper partition faulty | Renew the flame damper partition | |
| 3 | CHECK CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | Fault persists | Search for the fault starting from another symptom' | |