3237664 - 1028H20 piston with connecting rod - r r

Removing ( Refitting ) Position the vehicle on the ramp. - 4450B10  Front WHEEL (one) - R.R. (Right).  - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (Right).  - 1092G10  single engine belt r r - 1092A10  Crankshaft services PULLEY - R.R. .  - 1032D12  timing system protective cover(s) - r + r .  - 1008C10  power unit upper reaction link r r .  - 1016A10  sound-proofing cover - r + r .  - 1008C14  engine link bracket - r r .  - 1032B10  toothed timing belt - r + r for timing adjustment or replacement .  - 5530B10  battery - r+r .  - 1016C10  cylinder head - r + r and replace gasket .  - 1076B50  exhaust pipe attachment to engine - r + r .  - 1084A16  oil dip stick pipe - r r .  - 1020A20  crank case oil sump - r + r clean seals for sealant application . 1. Undo the bolts (1a) and remove the connecting rod cap (1b).2. Remove the bottom big end bearing shell. 1. Remove the connecting rod with the piston.2. Remove the upper connecting rod half-bearing. Refitting ( Removing ) 1. Fit the connecting rod - piston assembly and upper bearing shell (1a) using a suitable fitting tool (1b).

The connecting rod - piston assembly is fitted in the cylinder block so that the number stamped on the small end is facing the inlet side.

Fit the connecting rod cap complete with half-bearing, and tighten the bolts to the specified torque.

The connecting rod cap is fitted so that the number on it is facing the same way as the one stamped on small end.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	BIG END BEARING CAPS	M9	2.4 ÷ 2.6 + 60?

Use the appropriate tool for angular tightening of the connecting rod cap bolts.

	Name	Country
-	Protractor	1.860.942.000

 - 1020A20  crank case oil sump - r + r clean seals for sealant application .  - 1084A16  oil dip stick pipe - r r .  - 1076B50  exhaust pipe attachment to engine - r + r .  - 1016C10  cylinder head - r + r and replace gasket .  - 5530B10  battery - r+r .  - 1032B10  toothed timing belt - r + r for timing adjustment or replacement .  - 1008C14  engine link bracket - r r .  - 1016A10  sound-proofing cover - r + r .  - 1008C10  power unit upper reaction link r r .  - 1032D12  timing system protective cover(s) - r + r .  - 1092A10  Crankshaft services PULLEY - R.R. .  - 1092G10  single engine belt r r .  - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. (Right).  - 4450B10  Front WHEEL (one) - R.R. (Right). Remove the car from the ramp.